Can you use an export pallet if the IPPC/ISPM 15 mark is unreadable? Don’t assume that you can. ISPM 15 marks must be legible, durable and visible. If the mark can no longer clearly establish the pallet’s certification, the safest course is to keep it out of an international shipment until its compliance can be established through an authorized ISPM 15 facility.
You are preparing an international shipment and the pallet appears to be heat treated. There is an IPPC mark on the side, but part of it is difficult to read. Maybe the ink has faded, the wood has weathered, or abrasion has removed part of the mark. The pallet itself looks fine. Can you still use it for export?
This is where the value of the pallet and the value of the shipment need to be kept in perspective. Canadian Food Inspection Agency guidance is particularly clear that illegible certification marks are noncompliant. If there is doubt about the pallet’s marking or compliance, resolve it before the shipment leaves the dock.

What Does ISPM 15 Require of the Mark?
ISPM 15 calls for the mark to be placed in a visible location, preferably on at least two opposite sides of the wood packaging. That makes the certification easier to see during inspection, but the presence of another mark shouldn’t be treated as permission to ignore one that has become unreadable.
Nor is being able to see HT or part of the IPPC symbol enough. The complete mark contains information identifying the country, registered producer or treatment provider, and treatment method. If that information can no longer be read, the pallet shouldn’t be assumed to be compliant simply because part of the stamp remains visible.
For a newly purchased export pallet, resolving the problem may simply mean going back to the supplier. With a used pallet, the practical choices are to replace it with one carrying clearly legible, valid markings or have the questionable pallet handled through an appropriately authorized ISPM 15 facility if recertification makes economic sense.
This is one of the issues to watch when sourcing previously used export pallets. See Should I Buy Used Heat-Treated Pallets for International Shipping?
Can You Touch Up a Faded IPPC Mark?
No. The IPPC mark isn’t simply a reminder that somebody once heat-treated the wood. It is an official certification mark identifying the country and registered producer or treatment provider responsible for the compliant wood packaging.
A shipper, warehouse operator or unauthorized pallet repairer should therefore not retrace, touch up or reproduce a faded mark. Under Canada’s certification program, application of the IPPC mark is controlled and restricted to registered facilities.
The same caution applies when the pallet itself has been repaired. A clearly visible original IPPC mark does not necessarily establish the compliance of a pallet after boards, blocks or other components have been replaced. See Does a Repaired ISPM 15 Pallet Need to Be Heat Treated Again?
What Should You Do With a Pallet That Has an Unreadable Mark?
For the shipping department, the economics are fairly straightforward. Changing a questionable pallet before loading costs little compared with the potential expense and disruption of discovering a compliance problem after the shipment reaches its destination.
If the pallet is otherwise valuable or part of an export pallet inventory, an authorized ISPM 15 provider can determine the appropriate next step. What the shipper shouldn’t do is make the mark look readable again and assume the problem has been solved.
If the mark can’t clearly establish compliance, don’t put the shipment at risk to save a pallet.
Find answers to more questions about export pallets, pallet damage, repair, load stability and reuse at our Pallet Problems hub.
Have a pallet problem we haven’t covered? Send us your question. We may answer it directly or use it as the basis for a future Pallet Problems article.
Rick LeBlanc, EMBA, is the founder and editor of Reusable Packaging News (subscribe to the free newsletter) and editor of Western Pallet Magazine. A supply chain journalist with more than 30 years of experience, he specializes in pallets, reusable packaging, material handling and related operations. Rick is co-author of Pallets: A North American Perspective and Pallets & Progress: A Collected History of Pallets and Palletized Handling 1922–1945. He is also an advisory board member of the Virginia Tech Center for Packaging and Unit Load Design. Read Rick’s full bio.


