Quick answer: The standard pallet size in North America is 48×40 inches (1219×1016 mm), commonly associated with the GMA-style pallet used throughout grocery and consumer goods distribution. But there is no single standard pallet size worldwide. Europe commonly uses the 1200×800 mm EUR/EPAL pallet, while other industries and regions have developed standard footprints of their own.
What is the dimension of a standard pallet? It depends on where you are and what you’re shipping. There are several standard pallet sizes used in the United States and internationally. Dimensions vary between countries and industries and can include informal industry standards as well as formally recognized sizes.
Most supply chain professionals don’t spend much time thinking about pallet dimensions. In established supply chains, the size is usually taken for granted until something changes. A new customer may specify a different pallet, a new retail format may favor a half or quarter pallet, or newly installed warehouse automation may require tighter dimensional consistency.
The operational and merchandising benefits offered by half pallets and quarter pallets, for example, have encouraged their use for floor displays and in-aisle palletized stocking.
If you are trying to solve a specific pallet question rather than compare dimensions, visit our Pallet Problems resource for practical answers on pallet selection, capacity, damage, repair, load stability, ISPM 15, storage and reuse.
48×40 or 40×48? How Pallet Length and Width Are Determined
People often become confused about the order in which pallet dimensions are listed. Pallet dimensions are conventionally stated as length followed by width.
For a stringer pallet, length runs parallel to the stringers. On a block pallet, it runs parallel to the stringerboards. Width runs parallel to the top deckboards.
That distinction matters. A 48×40-inch pallet has 48-inch stringers or stringerboards and 40-inch deckboards, while a 40×48-inch pallet has 40-inch stringers or stringerboards and 48-inch deckboards. They occupy the same rectangular area, but they are not simply the same pallet described from a different viewing direction.

Here are the basic definitions from the NWPCA Uniform Standard for Wood Pallets:
Pallet length: the pallet dimension parallel to the stringers or top stringerboards.
Pallet width: the pallet dimension parallel to the top deckboards.
Pallet size: conventionally expressed as pallet length followed by width and, when required, overall height.
Pallets are also classified by their entry conditions, including two-way, partial four-way and full four-way entry. For a fuller explanation of those distinctions, see our guide to the different types of pallets and their uses.

Related: 7 Reasons Why Standard Pallet Sizes Are Important
Standard Pallet Sizes in North America
Today, when people talk about the standard pallet size in North America, they usually mean the 48×40-inch (1219×1016-mm) pallet. It is particularly well established in grocery, retail and fast-moving consumer goods supply chains.
That wasn’t always the case. In the years following the Second World War, the 40×48-inch pallet was much more prominent, particularly for rail shipment. As truck transportation became increasingly important, the 48×40-inch orientation gained ground and became the dominant footprint in many North American supply chains.
The 48×40-inch footprint is also one of the six pallet sizes recognized by ISO for intercontinental materials handling. In North America, the notched-stringer GMA-style pallet has long been the unofficial standard for fast-moving consumer goods.
That doesn’t mean every 48×40 pallet is the same. Such pallets can vary considerably in component thickness and width, lumber species and grade, fasteners, repair practices and allowable damage. When pallet performance matters, specifying only “48×40” isn’t enough. Detailed construction and performance requirements should be communicated to pallet suppliers and inbound shippers.
The 48×40-inch block pallet also became increasingly prominent in North American FMCG supply chains beginning in the late 1990s and early 2000s as pallet rental providers such as CHEP and later PECO made standardized block pallets widely available. Block pallets were already well established in other markets, including Europe.
CHEP’s standard North American full-size pallet is 48×40 inches. The company also offers fractional pallet formats for particular markets and applications. Internationally, CHEP pallet dimensions generally reflect the established pallet standards of the region being served.
Other common North American industry footprints include:
- 48×45 inches – automotive
- 48×48 inches – drums and other industrial applications
- 40×40 inches – dairy
- 36×36 inches – beverage distribution
The important point is that “standard” often means standard within a particular supply chain. The pallet that dominates grocery distribution isn’t necessarily the pallet used in automotive, dairy, beverage or chemical operations.
Does Pallet Size Determine Load Capacity?
No. Two pallets with the same footprint can have very different load capacities depending on their design, materials, component dimensions, fasteners and condition. Capacity also changes according to how the pallet is supported, such as sitting on the floor, being handled by a forklift or stored in pallet racking.
That is why it can be misleading to assign one load-capacity number to a pallet simply because it measures 48×40 inches. A lightly constructed expendable pallet and a heavy-duty rental pallet may share the same footprint while performing very differently under load.
For a fuller explanation of static, dynamic and edge-rack capacity, see How Much Weight Can a Pallet Hold?.
Standard Pallet Sizes in Europe
When discussing standard European pallets, the 1200×800 mm footprint usually comes to mind first. The EUR/EPAL pallet has become deeply embedded in European logistics, while the 1200×1000 mm footprint is also widely used, particularly in the UK and in industrial applications.
The European Pallet Association (EPAL) supports several standardized pallet formats, including smaller fractional pallets. These include the 600×400 mm half pallet and 400×300 mm quarter pallet.
For readers accustomed to inches, 1000 mm equals approximately 39.37 inches, while the 1200×800 mm European pallet measures approximately 47.24×31.50 inches.
Chemical Industry Pallet Sizes
The chemical and plastics industries provide a good example of why a single global pallet size doesn’t work for every application. CP pallets are standardized designs used by many companies in the European chemical and plastics supply chain.
The CP pallet system was established in 1991 by the German chemical industry association VCI. Oversight subsequently passed to APME, now PlasticsEurope. The European Pallet Association has also expanded its range to include quality-assured EPAL CP pallets.
Rather than relying on a single footprint, the CP system includes several sizes designed around different packages and handling requirements:
- CP1 – 1200×1000 mm: boxes and sacks
- CP2 – 1200×800 mm: carton boxes and sacks
- CP3 – 1140×1140 mm: drums and bulk bags
- CP4 – 1100×1300 mm: sacks
- CP5 – 760×1140 mm: smaller packages such as boxes and bins
- CP6 – 1200×1000 mm: sacks
- CP7 – 1300×1100 mm: sacks
- CP8 – 1140×1140 mm: container transportation
- CP9 – 1140×1140 mm: containers, drums and bulk bags
The range illustrates the tradeoff that frequently comes with pallet standardization. A single footprint simplifies handling and pooling, but different products and packaging formats don’t always fit efficiently on the same pallet.
Standard Pallet Sizes Internationally
Six principal pallet footprints are recognized in ISO 6780, Flat pallets for intercontinental materials handling — Principal dimensions and tolerances. These reflect pallet systems that became established in different parts of the world rather than one universal pallet footprint.
The 1165×1165 mm pallet is well established in Australia, while 1100×1100 mm pallets are widely associated with Japan and Korea. The 1200×1000 mm footprint is also extensively used internationally, including in many FMCG and industrial supply chains.
Standard dimensions can make supply chains considerably more efficient when they align pallets with racking, conveyors, lift trucks, trailers, containers and packaging. Once that infrastructure has been built around a particular footprint, however, changing pallet size can become expensive. A seemingly simple change to the pallet can ripple through an entire material handling system.
How Many Pallets Fit in a Shipping Container?
Pallet size also influences how efficiently an international shipping container can be utilized. As a general guide, a 20-foot standard container can accommodate about 11 EUR pallets measuring 1200×800 mm or roughly 9 to 10 pallets measuring 1200×1000 mm, depending on loading pattern and container specifications.
A 40-foot standard container can typically accommodate about 23 to 25 EUR pallets or around 20 to 21 pallets measuring 1200×1000 mm. Pallet-wide containers are designed to reduce some of the unused space created when common European pallet footprints are loaded into conventional ISO containers.
These figures should be treated as planning guidance rather than guarantees. Actual capacity can be affected by the precise internal dimensions of the container, pallet construction, load overhang and how the pallets are arranged.
For domestic over-the-road capacity, see How Many Pallets Fit in a Truck?.
Frequently Asked Questions About Standard Pallet Sizes
What is the standard pallet size in the U.S.?
The most widely used pallet footprint in U.S. grocery and consumer goods distribution is 48×40 inches (1219×1016 mm), commonly referred to as the GMA-style pallet. Other industries use different standard footprints.
What’s the difference between a 48×40 and a 40×48 pallet?
Both occupy the same overall rectangular area, but they are not necessarily the same pallet turned 90 degrees. Pallet dimensions are conventionally stated as length x width, with length running parallel to the stringers or stringerboards. A 48×40 pallet therefore has a different structural orientation from a 40×48 pallet.
How much weight can a standard pallet hold?
There is no single capacity for a standard 48×40-inch pallet. Capacity depends on the pallet’s design, construction, condition, load distribution and how it is supported. See our guide to pallet load capacity for a detailed explanation.
What is the standard European pallet size?
The 1200×800 mm EUR/EPAL pallet is one of the most widely used standardized pallet footprints in Europe. The 1200×1000 mm footprint is also common, particularly in the UK and in various industrial applications.
Why are there so many different pallet sizes?
Different industries and regions developed pallet dimensions around their products, transportation systems, material handling equipment and established infrastructure. Automotive, dairy, beverage and chemical supply chains, for example, have different packaging and handling requirements. Standardization within a supply chain can therefore be more important than having one universal pallet size.
The Bottom Line
If someone asks for the standard pallet size in North America, 48×40 inches is usually the answer they’re looking for. But specifying pallet dimensions is only the beginning. The appropriate footprint depends on the industry, region, product, handling system and customer requirements.
And two pallets of exactly the same dimensions can perform very differently. Size tells you whether the pallet fits the system. It doesn’t tell you how much weight it can safely carry, how it will perform in racking or whether it is suitable for a particular load.
For more practical answers about pallet sizes, selection, load capacity, damage, repair, export requirements and handling, continue to Pallet Problems: Answers to Common Pallet Questions.
Have a pallet problem we haven’t covered? Send us your question. We may answer it directly or use it as the basis for a future Pallet Problems article.
Resources
ANSI MH1: Pallets, Slip Sheets, and Other Bases for Unit Loads
NWPCA Uniform Standard for Wood Pallets
How Do Differing Standards Increase Trade Costs? The Case of Pallets
More on GMA Pallets
Learn more about recycled pallet grades and remanufactured pallets.
Rick LeBlanc, EMBA, is the founder and editor of Reusable Packaging News (subscribe to the free newsletter) and editor of Western Pallet Magazine. A supply chain journalist with more than 30 years of experience, he specializes in pallets, reusable packaging, material handling and related operations. Rick is co-author of Pallets: A North American Perspective and Pallets & Progress: A Collected History of Pallets and Palletized Handling 1922–1945. He is also an advisory board member of the Virginia Tech Center for Packaging and Unit Load Design. Read Rick’s full bio.


