A wood pallet is almost new, but a forklift entered it with tilted forks and popped one of the top deck boards loose. Otherwise, the pallet is sound. Does it really need to be discarded?
Probably not. Many damaged wood pallets can be repaired and safely returned to service. In fact, repairability is one of the strengths of wood pallets and an important reason they can remain in circulation through multiple trips. The question is whether the damage can be properly repaired and whether the resulting pallet remains suitable for its intended load and handling environment.

Some repairs are simple
Minor damage does not always require a trip to the pallet repair shop. A protruding nail may simply need to be driven down. A loose deck board may sometimes be properly secured with an additional fastener.
Beyond simple fixes, however, pallet repair is typically best left to a pallet recycler or professional repair operation. Common repairs include replacing broken or missing deck boards, repairing damaged stringers, replacing blocks, and correcting previous fastening problems.
Pallet repair operations have equipment designed specifically for this work. Dismantling machinery, for example, can separate damaged pallet components while allowing usable lumber to be recovered. Repair tables, nailers, and other equipment help ensure that replacement components are properly positioned and fastened.
That last point matters. A repair isn’t successful simply because the loose board no longer moves. Replacement components should be appropriate for the pallet, and the correct fasteners and fastening patterns are important to restoring its performance.
Not every pallet is worth repairing
Even though a pallet can be repaired, sometimes it doesn’t make sense. There comes a point where repair is no longer economical or practical. A pallet with extensive structural damage, contamination, or numerous broken components may be better dismantled for usable parts, with the remaining material reduced to fiber. Our guide to when a wood pallet should be taken out of service looks more closely at the warning signs.
The economics also vary by pallet. With common 48×40-inch whitewood GMA pallets in North America, a warehouse typically isn’t concerned about getting the same pallets back. Damaged pallets, commonly referred to as cores, can be accumulated and sold or returned to a recycler, sometimes for a credit. The shipper then purchases repaired pallets in the grade and quantity it requires.
The calculation can differ for a custom pallet, where replacement may be considerably more expensive. Likewise, proprietary and closed-loop pallet systems generally have an incentive to repair their assets and put them back into circulation.
Certification can complicate the repair
Some pallets can’t simply be repaired by anyone with a hammer and a handful of nails if they are expected to retain a certification or recognized pool status.
ISPM 15-marked pallets used in international trade are a good example. In Canada, repairs intended to maintain ISPM 15 certification must be carried out under the Canadian Heat Treated Wood Products Certification Program. Replacement components must meet ISPM 15 requirements and be appropriately marked by the registered repairing facility. More extensive rebuilding can cause the pallet to be considered remanufactured, requiring the old marks to be obliterated and the pallet to be retreated and remarked. For a closer look at this issue, see Does a Repaired ISPM 15 Pallet Need to Be Heat Treated Again?
U.S. requirements likewise place the treatment and marking of repaired or remanufactured ISPM 15 wood packaging within the accredited certification system. An ordinary pallet repair should therefore not be assumed to preserve the pallet’s ISPM 15 status simply because heat-treated lumber was used.
A separate exemption covers qualifying Canadian- and U.S.-origin wood packaging moving directly between Canada and the continental United States.
EPAL pallets provide another example. Damaged EPAL pallets must be repaired by an EPAL-licensed repair operation. EPAL specifies replacement components, repair procedures and fastening requirements as part of maintaining the integrity of the exchange pool.
Other proprietary pallet pools can have their own rules regarding repair and ownership, so a damaged pool pallet shouldn’t simply be treated as an ordinary whitewood pallet. If CHEP, PECO or iGPS pallets have accumulated at your facility, see What Should I Do With CHEP, PECO or iGPS Pallets?
Repaired doesn’t mean second-rate
A visible repair shouldn’t automatically disqualify a pallet. A properly repaired pallet can continue to provide useful service.
The more important question is whether the repair has restored the pallet to a structurally sound condition appropriate for what comes next. A pallet going under a light unit load stored on the floor may face different demands than one carrying a heavy load in a free-span pallet rack, travelling through a conveyor system or making repeated trips through a demanding supply chain. If load capacity is a concern, see How Much Weight Can a Pallet Hold?
That nearly new pallet with the popped deck board? Repair it properly, and there may be plenty of life left in it.
A pallet with multiple broken components, questionable previous repairs, and serious structural deterioration is a different story. At some point, the better repair decision is knowing when to stop repairing.
Find answers to more pallet-related questions at our Pallet Problems hub.
Have a pallet problem we haven’t covered? Send us your question. We may answer it directly or use it as the basis for a future Pallet Problems article.
Related Article
When Should a Wood Pallet Be Taken Out of Service?
Rick LeBlanc, EMBA, is the founder and editor of Reusable Packaging News (subscribe to the free newsletter) and editor of Western Pallet Magazine. A supply chain journalist with more than 30 years of experience, he specializes in pallets, reusable packaging, material handling and related operations. Rick is co-author of Pallets: A North American Perspective and Pallets & Progress: A Collected History of Pallets and Palletized Handling 1922–1945. He is also an advisory board member of the Virginia Tech Center for Packaging and Unit Load Design. Read Rick’s full bio.


